Grinder & Cutter Pumps
TSB supplies Grinder & Cutter Pumps in Jordan for sewage, wastewater, drainage and industrial effluent applications where fibrous materials, solids and difficult waste must be reduced before pumping.
These pumps use integrated cutting or grinding mechanisms to break down solids and fibrous material into smaller particles before they enter the hydraulic section. This helps reduce the risk of clogging in pumps, pipelines and downstream wastewater systems.
Product Overview
Grinder & Cutter Pumps combine:
- Integrated cutting or grinding mechanisms
- Reliable handling of fibrous and contaminated wastewater
- Wide range of flow and head capabilities
- Submersible and selected dry-installed configurations
- High-head options for pressure sewage systems
- Multiple impeller and cutting-system designs
- Compact installation
- Heavy-duty mechanical sealing
- Automatic level-control options
- Cast iron, stainless steel and selected material configurations
- Continuous and intermittent-duty options
- Configurations for municipal, commercial and industrial wastewater
Typical Technical Configuration
| Specification | Typical Capability |
|---|---|
| Pump Type | Grinder or cutter wastewater pump |
| Installation | Submersible, free-standing, guide-rail or selected dry installation |
| Flow Range | Selected according to required duty point |
| Head Range | Selected according to required duty point |
| Cutting System | Grinder, cutter or macerating mechanism |
| Impeller | Application-specific sewage hydraulic design |
| Solids Handling | Fibrous and contaminated wastewater |
| Pump Materials | Cast iron, stainless steel and selected special materials |
| Shaft | Stainless steel and selected alloy options |
| Seal Arrangement | Heavy-duty mechanical seal system |
| Motor | Integrated submersible electric motor on applicable configurations |
| Control | Manual, automatic or level-controlled operation |
Specifications and available options may vary. Contact TSB for full details and configuration support.
Key Features
- Integrated cutting or grinding system for difficult wastewater
- Reduces fibrous materials before they enter the pump hydraulics
- Helps minimize clogging in pumps and discharge pipelines
- Suitable for sewage containing wipes, textiles and other fibrous materials
- High-head configurations available for pressure sewer applications
- Compact submersible installation
- Multiple cutter and grinder designs for different wastewater conditions
- Heavy-duty mechanical sealing for submerged operation
- Guide-rail systems available for easier pump removal and maintenance
- Automatic level-control integration
- Motor protection and monitoring options
- Robust construction for demanding wastewater environments
- Suitable for continuous and intermittent pumping duties
Applications
- Municipal sewage
- Wastewater pumping stations
- Pressure sewer systems
- Residential wastewater
- Commercial buildings
- Hotels and hospitals
- Restaurants and food facilities
- Industrial wastewater
- Sewage lift stations
- Collection pits
- Drainage systems
- Septic systems
- Small-bore sewer networks
- Wastewater containing fibers and solids
- Process effluent
Why Choose Grinder & Cutter Pumps?
Grinder & Cutter Pumps are selected when wastewater contains fibrous, stringy or difficult solids that can cause clogging in conventional sewage pumps and pipelines.
The cutting mechanism reduces these materials before they pass through the pump, helping maintain reliable flow and reducing the likelihood of blockages in smaller-diameter discharge lines.
Grinder pumps are particularly suitable for pressure sewage systems where wastewater must be pumped over longer distances or against higher heads, while cutter pumps provide effective solids reduction for demanding sewage and industrial wastewater applications.
For wastewater operators and contractors, this provides improved clog resistance, reliable solids handling, reduced maintenance and flexible installation across demanding sewage applications.
TSB Support in Jordan
TSB supplies Grinder & Cutter Pumps throughout Jordan and supports customers in selecting the appropriate pump according to required flow, head, wastewater composition, solids characteristics and installation conditions.
Our local support includes:
- Pump selection and technical consultation
- Hydraulic sizing and application engineering
- Grinder and cutter system selection
- Material and seal selection
- Motor and protection system selection
- Guide-rail and installation system selection
- Supply and commissioning
- Pump testing support
- After-sales service
- Spare parts support
- Preventive and corrective maintenance
- On-site technical service
- In-house workshop support
- Pump troubleshooting and repair
Contact TSB for Grinder & Cutter Pump specifications, selection, pricing and configuration support in Jordan.
There are no reviews yet.