Electromagnetic Flowmeters
TSB supplies Electromagnetic Flow Meters in Jordan for accurate and reliable flow measurement of electrically conductive liquids across water, wastewater, chemical, food and beverage, mining, utilities and industrial process applications.
The measuring principle is based on Faraday’s law of electromagnetic induction. As a conductive liquid flows through a magnetic field, a voltage is generated and measured by electrodes. This voltage is directly proportional to the flow velocity and is used to calculate volumetric flow.
Product Overview
Electromagnetic Flow Meters combine:
- Volume flow measurement of conductive liquids
- Measurement of water, wastewater, acids, alkalis and slurries
- Nominal diameters from approximately DN2 to DN3000
- Accuracy up to approximately ±0.2% of reading
- Flow velocities typically from approximately 0.01 to 10 m/s
- Minimum liquid conductivity typically around 5 µS/cm
- Process temperatures up to approximately +180°C
- Process pressures up to approximately PN40 / Class 300 on selected configurations
- No moving mechanical parts
- Free pipe cross-section with minimal pressure loss
- Compact and remote transmitter configurations
- Advanced diagnostics and verification functions
Typical Technical Range
| Specification | Typical Capability |
|---|---|
| Measuring Principle | Electromagnetic / Faraday’s law |
| Media | Electrically conductive liquids |
| Nominal Diameter | Approximately DN2 – DN3000 |
| Accuracy | Up to approximately ±0.2% of reading |
| Typical Flow Velocity | Approximately 0.01 – 10 m/s |
| Minimum Conductivity | Typically ≥5 µS/cm |
| Medium Temperature | Up to approximately +180°C on selected configurations |
| Process Pressure | Up to approximately PN40 / Class 300 on selected configurations |
| Measured Variables | Volume flow, conductivity and calculated mass flow depending on configuration |
| Installation | Compact or remote |
| Communication | 4–20 mA HART, PROFIBUS, FOUNDATION Fieldbus, Modbus, EtherNet/IP, PROFINET and Ethernet-APL depending on transmitter |
Specifications and available options may vary. Contact TSB for full details and configuration support.
Key Features
- Accurate measurement of electrically conductive liquids
- Measuring principle largely independent of pressure, density, temperature and viscosity
- Suitable for clean liquids and fluids containing entrained solids
- No moving mechanical parts for low maintenance requirements
- Free pipe cross-section without flow restrictions
- Minimal additional pressure loss
- Wide range of nominal pipe diameters
- Multiple liner and electrode materials for aggressive and corrosive liquids
- Hygienic configurations for food, beverage and life sciences
- Robust versions for water, wastewater, mining and slurry applications
- High-temperature configurations for process industries
- Custody-transfer configurations available for selected applications
- 0 x DN full-bore configurations available for installations with limited inlet and outlet straight runs
- Integrated diagnostics and verification functions
- Multiple analog and digital communication options
Applications
- Drinking water
- Water distribution
- Wastewater treatment
- Sewage networks
- Irrigation
- Desalination
- Chemical processing
- Acids and alkalis
- Food and beverage
- Pharmaceutical processes
- Mining and mineral slurries
- Pulp and paper
- Industrial process water
- Cooling water
- Filling and dosing
- Utility monitoring
- Custody transfer applications
Why Choose Electromagnetic Flow Meters?
Electromagnetic Flow Meters provide a proven and highly versatile solution for measuring conductive liquids.
Because there are no mechanical moving parts or restrictions within the measuring tube, the technology provides reliable flow measurement with minimal pressure loss and low maintenance requirements. This also makes electromagnetic meters suitable for liquids containing suspended solids, such as wastewater, sludge and mining slurries.
The measuring principle is largely independent of changes in pressure, density, temperature and viscosity, supporting stable measurement across changing process conditions.
Different liners, electrode materials, process connections and transmitter configurations allow the technology to be adapted to applications ranging from clean drinking water and hygienic processes to corrosive chemicals and abrasive slurries.
For plant operators, this provides accurate flow measurement, low maintenance, broad application flexibility and reliable integration into modern automation systems.
TSB Support in Jordan
TSB supplies Electromagnetic Flow Meters throughout Jordan and supports customers in selecting the appropriate solution according to liquid conductivity, flow range, pipe diameter, temperature, pressure, liner material and installation requirements.
Our local support includes:
- Instrument selection and technical consultation
- Application engineering
- Flow meter sizing and configuration
- Liner and electrode material selection
- Supply and commissioning
- Calibration and verification support
- System integration
- After-sales service
- Spare parts support
- Preventive and corrective maintenance
- On-site technical support
- Troubleshooting assistance
Contact TSB for Electromagnetic Flow Meter specifications, selection, pricing and configuration support in Jordan.
There are no reviews yet.